Course ID
105743
Topic ID
0
Course Location
Academic Term
Notes
Lab Fee: $80. Mon.-Fri. 1:30-9 p.m. in EDSN 150. Students must attend first class on Mon. and complete all coursework by 5/8/2024. Additional costs up to $150 for protective clothing and equipment may be required. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Section
9601
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description
This course is a continuation of Welding II and focuses on the GMAW and the FCAW processes. The Air Carbon Arc Cutting section will further develop skills in the process. The student will develop skills required to make fillet and groove welds in all positions using GMAW and FCAW processes. The student will be introduced to the Plasma Arc Cutting Process.
Class Type
Status
Open
Subject Term Reference
Late Start
No
Catalog Number
231
Day or Night Section
Day
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Crytime Formatted
Applied Technology Center • 01/22/24–05/10/24
Department Phone
856-5300
Notes (For Filter)
Lab Fee: $80. Mon.-Fri. 1:30-9 p.m. in EDSN 150. Students must attend first class on Mon. and complete all coursework by 5/8/2024. Additional costs up to $150 for protective clothing and equipment may be required. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Prerequisites (For Filter)
Prerequisite: WELD 222 or instructor approval. Students enrolling in in WELD 231-9601 must enroll in WELD 232-9601.
Class Subject Abbr
WELD