Fall 2023

Internal TMCC Term ID
2238
Display On Software Page
Off
Display in Homepage Academics Section
Off

Vocal Techniques

Course ID
104157
Topic ID
0
Course Location
Dandini Campus
Academic Term
Fall 2023
Notes
Lab Fee: $25. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Section
2001
Minimum Units (Decimal)
2.00
Maximum Units (Decimal)
2.00
Description

Fundamentals of tone production, breath control, and practical techniques involved in reading and interpreting songs. May be repeated for a maximum of 4 credits.

Class Type
In-Person Class
Status
Open
Subject Term Reference
Music
Late Start
No
Catalog Number
105
Day or Night Section
Night
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Music - MUS
Crytime Formatted
5:30–7:10 p.m. • M • Dandini Campus • 08/21/23–12/04/23
Department Phone
674-7610
Notes (For Filter)
Lab Fee: $25. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Class Subject Abbr
MUS

Music Fundamentals

Course ID
104154
Topic ID
0
Course Location
Dandini Campus
Academic Term
Fall 2023
Notes
Lab Fee: $25. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Section
1002
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

Notation, terminology, intervals, scales and chords. Designed to furnish a foundation for musicianship and music theory.

Class Type
In-Person Class
Status
Full
Subject Term Reference
Music
Late Start
No
Catalog Number
101
Day or Night Section
Day
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Music - MUS
Crytime Formatted
11:00 a.m.–12:15 p.m. • M W • Dandini Campus • 08/21/23–12/06/23
Department Phone
674-7610
Notes (For Filter)
Lab Fee: $25. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Class Subject Abbr
MUS

Computer-Aided Manufacturing I

Course ID
104124
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Fall 2023
Notes
Lab Fee: $50. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes
Section
2001
Minimum Units (Decimal)
4.00
Maximum Units (Decimal)
4.00
Description

This course provides the student with the essential concepts and techniques that are required for successful creation of two-dimensional part geometry, generation and verification of 2 1/2 axis toolpath models, as well as post processing of 2 1/2 axis NC codes within a computer-aided manufacturing (CAM) system. Students are required to produce a variety of lab exercises on robotic (CNC) machinery utilizing multi-tool programs. Coursework will primarily focus on 2D geometry projects. Basic understanding of milling machine operations is recommended. This course satisfies 8 hours of instruction toward completing the embedded mathematics curriculum requirements, in accordance with Embedded Curriculum Guidelines Option A.

Class Type
In-Person Class
Status
Open
Subject Term Reference
Machine Tool Technology
Late Start
No
Catalog Number
292
Day or Night Section
Night
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Machine Tool Technology - MTT
Crytime Formatted
5:00–6:50 p.m. • T TH • Applied Technology Center • 08/22/23–12/07/23
Department Phone
856-5300
Notes (For Filter)
Lab Fee: $50. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes
Class Subject Abbr
MTT

Machine Shop IV

Course ID
104118
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Fall 2023
Notes
Lab Fee $50. This class is scheduled to meet face-to-face. Lab open Mon.-Thu. from 4-9 p.m. Meets at EDSN 164. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes
Section
9601
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

This is a continuation of MTT 250 and prepares students to determine hole locations by coordinates and degrees, use a rotary table, boring head, form tools, angle work, and work within +/- .001 inch tolerance.

Class Type
In-Person Class
Status
Open
Subject Term Reference
Machine Tool Technology
Late Start
No
Catalog Number
260
Day or Night Section
Day
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Machine Tool Technology - MTT
Crytime Formatted
Applied Technology Center • 08/21/23–12/09/23
Department Phone
856-5300
Notes (For Filter)
Lab Fee $50. This class is scheduled to meet face-to-face. Lab open Mon.-Thu. from 4-9 p.m. Meets at EDSN 164. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes
Prerequisites (For Filter)
Prerequisite: MTT 250. Course may be taken concurrently with MTT 250.
Class Subject Abbr
MTT

Machine Shop IV

Course ID
104118
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Fall 2023
Notes
Lab Fee: $50. This class is scheduled to meet face-to-face. Open Entry/Closed Exit lab Mon.-Thu. from 4-9 p.m. Students enrolling in DYN open-entry classes have 24 hours after the time of enrollment to drop the class for a 100% refund. Students must enroll by 10/2/2023 and complete all work by 12/9/2023. Meets at EDSN 164. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes
Section
8001
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

This is a continuation of MTT 250 and prepares students to determine hole locations by coordinates and degrees, use a rotary table, boring head, form tools, angle work, and work within +/- .001 inch tolerance.

Class Type
In-Person Class
Status
Open
Subject Term Reference
Machine Tool Technology
Late Start
No
Catalog Number
260
Day or Night Section
Day
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Machine Tool Technology - MTT
Crytime Formatted
Applied Technology Center • 08/21/23–12/09/23
Department Phone
856-5300
Notes (For Filter)
Lab Fee: $50. This class is scheduled to meet face-to-face. Open Entry/Closed Exit lab Mon.-Thu. from 4-9 p.m. Students enrolling in DYN open-entry classes have 24 hours after the time of enrollment to drop the class for a 100% refund. Students must enroll by 10/2/2023 and complete all work by 12/9/2023. Meets at EDSN 164. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes
Prerequisites (For Filter)
Prerequisite: MTT 250. Course may be taken concurrently with MTT 250.
Class Subject Abbr
MTT

Machine Shop III

Course ID
104114
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Fall 2023
Notes
Lab Fee $50. This class is scheduled to meet face-to-face. Lab open Mon.-Thu. from 4-9 p.m. Meets at EDSN 164. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes
Section
9601
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

Introduces basic milling machine applications which will consist of identifying mill components and controls, understanding milling safety, calculating speeds and feeds, using various tools and tool holders, identifying basic tool geometry, and the use of common milling machine tooling. Students will perform basic milling operations consisting of facing, squaring, slotting, and drilling. Students will be required to produce specified parts to a tolerance of +/- .004 in. and perform competencies set by manufacturing standards.

Class Type
In-Person Class
Status
Open
Subject Term Reference
Machine Tool Technology
Late Start
No
Catalog Number
250
Day or Night Section
Day
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Machine Tool Technology - MTT
Crytime Formatted
Applied Technology Center • 08/21/23–12/09/23
Department Phone
856-5300
Notes (For Filter)
Lab Fee $50. This class is scheduled to meet face-to-face. Lab open Mon.-Thu. from 4-9 p.m. Meets at EDSN 164. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes
Class Subject Abbr
MTT

Machine Shop III

Course ID
104114
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Fall 2023
Notes
Lab Fee $50. This class is scheduled to meet face-to-face. Open Entry/Closed Exit lab Mon.-Thu. from 4-9 p.m. Students enrolling in DYN open-entry classes have 24 hours after the time of enrollment to drop the class for a 100% refund. Students must enroll by 10/2/2023 and complete all work by 12/9/2023. Meets at EDSN 164. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes
Section
8001
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

Introduces basic milling machine applications which will consist of identifying mill components and controls, understanding milling safety, calculating speeds and feeds, using various tools and tool holders, identifying basic tool geometry, and the use of common milling machine tooling. Students will perform basic milling operations consisting of facing, squaring, slotting, and drilling. Students will be required to produce specified parts to a tolerance of +/- .004 in. and perform competencies set by manufacturing standards.

Class Type
In-Person Class
Status
Open
Subject Term Reference
Machine Tool Technology
Late Start
No
Catalog Number
250
Day or Night Section
Day
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Machine Tool Technology - MTT
Crytime Formatted
Applied Technology Center • 08/21/23–12/09/23
Department Phone
856-5300
Notes (For Filter)
Lab Fee $50. This class is scheduled to meet face-to-face. Open Entry/Closed Exit lab Mon.-Thu. from 4-9 p.m. Students enrolling in DYN open-entry classes have 24 hours after the time of enrollment to drop the class for a 100% refund. Students must enroll by 10/2/2023 and complete all work by 12/9/2023. Meets at EDSN 164. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes
Class Subject Abbr
MTT

Computer Numerical Control I

Course ID
104110
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Fall 2023
Notes
Lab Fee: $50. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes
Section
2001
Minimum Units (Decimal)
4.00
Maximum Units (Decimal)
4.00
Description

Covers computer numerical control (CNC) lathe operations, program format, and machine setup. G & M codes, control functions, the letter address system, and math issues related to CNC are included. This course satisfies 7.5 hours of instruction toward completing the embedded human relations curriculum requirements, in accordance with Embedded Curriculum Guidelines Option A. This course satisfies 8 hours of instruction toward completing the embedded mathematics curriculum requirements, in accordance with Embedded Curriculum Guidelines Option A.

Class Type
In-Person Class
Status
Open
Subject Term Reference
Machine Tool Technology
Late Start
No
Catalog Number
230
Day or Night Section
Night
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Machine Tool Technology - MTT
Crytime Formatted
5:00–6:50 p.m. • M W • Applied Technology Center • 08/21/23–12/06/23
Department Phone
856-5300
Notes (For Filter)
Lab Fee: $50. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes
Class Subject Abbr
MTT

Metallurgy I

Course ID
104024
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Fall 2023
Notes
Lab Fee $10. This class is scheduled to meet face-to-face. Lab open Mon.-Thu. from 4-9 p.m. Meets at EDSN 164. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Section
9601
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

Offers a study of metallurgical properties in an effort to understand both the behavior of metals and their service to industry. Characteristics during heating, cooling, shaping, forming, and the stresses related to their mechanical properties are covered. The theory behind the alloys, heat treatment processes, and the impact they have on strength, toughness, hardness, elasticity, ductility, malleability, wear resistance and fatigue resistance is investigated. This course fulfills the natural sciences degree requirement for nontransferable AAS degrees only.

Class Type
In-Person Class
Status
Open
Subject Term Reference
Machine Tool Technology
Late Start
No
Catalog Number
150
Day or Night Section
Day
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Machine Tool Technology - MTT
Crytime Formatted
Applied Technology Center • 08/21/23–12/09/23
Department Phone
856-5300
Notes (For Filter)
Lab Fee $10. This class is scheduled to meet face-to-face. Lab open Mon.-Thu. from 4-9 p.m. Meets at EDSN 164. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Class Subject Abbr
MTT

Metallurgy I

Course ID
104024
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Fall 2023
Notes
Lab Fee $10. This class is scheduled to meet face-to-face. Open Entry/Closed Exit lab Mon-Thu from 4-9 p.m. Students enrolling in DYN open-entry classes have 24 hours after the time of enrollment to drop the class for a 100% refund. Students must enroll by 10/2/2023 and complete all work by 12/9/2023. Meets at EDSN 164. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Section
8001
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

Offers a study of metallurgical properties in an effort to understand both the behavior of metals and their service to industry. Characteristics during heating, cooling, shaping, forming, and the stresses related to their mechanical properties are covered. The theory behind the alloys, heat treatment processes, and the impact they have on strength, toughness, hardness, elasticity, ductility, malleability, wear resistance and fatigue resistance is investigated. This course fulfills the natural sciences degree requirement for nontransferable AAS degrees only.

Class Type
In-Person Class
Status
Open
Subject Term Reference
Machine Tool Technology
Late Start
No
Catalog Number
150
Day or Night Section
Day
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Machine Tool Technology - MTT
Crytime Formatted
Applied Technology Center • 08/21/23–12/09/23
Department Phone
856-5300
Notes (For Filter)
Lab Fee $10. This class is scheduled to meet face-to-face. Open Entry/Closed Exit lab Mon-Thu from 4-9 p.m. Students enrolling in DYN open-entry classes have 24 hours after the time of enrollment to drop the class for a 100% refund. Students must enroll by 10/2/2023 and complete all work by 12/9/2023. Meets at EDSN 164. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Class Subject Abbr
MTT
Subscribe to Fall 2023