1. Home
  2. Applied Technology Center

Applied Technology Center

Construction Drawings and Detailing

Course ID
100011
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Fall 2024
Notes
Lab Fee: $25. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Section
1001
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

This class will include the analysis of assembling and detailing for construction in the field of architecture and understanding of the reading and interpretation of representative construction prints. Techniques for the production of construction details will be discussed, demonstrated, and applied.

Class Type
In-Person Class
Status
Full
Subject Term Reference
Architectural Design
Late Start
No
Catalog Number
125
Day or Night Section
Day
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Architectural Design - AAD
Crytime Formatted
1:25–2:50 p.m. • T TH • Applied Technology Center • 08/27/24–12/12/24
Department Phone
856-5300
Notes (For Filter)
Lab Fee: $25. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Class Subject Abbr
AAD
Class Materials
No Cost

Design with Nature

Course ID
100003
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Fall 2024
Notes
Lab Fee: $20. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Section
1002
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

Introduces the concepts of natural systems and their influence on human activity and the living environment. Reviews the historical context and cultural adaptations and introduces the basic management and use of the natural systems. Reviews natural, biological, cultural and design management philosophies.

Class Type
In-Person Class
Status
Full
Subject Term Reference
Architectural Design
Late Start
No
Catalog Number
101
Day or Night Section
Day
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Architectural Design - AAD
Crytime Formatted
1:00–3:50 p.m. • F • Applied Technology Center • 08/30/24–12/13/24
Department Phone
856-5300
Notes (For Filter)
Lab Fee: $20. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Class Subject Abbr
AAD
Class Materials
No Cost

Design with Nature

Course ID
100003
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Fall 2024
Notes
Lab Fee: $20. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes
Section
1001
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

Introduces the concepts of natural systems and their influence on human activity and the living environment. Reviews the historical context and cultural adaptations and introduces the basic management and use of the natural systems. Reviews natural, biological, cultural and design management philosophies.

Class Type
In-Person Class
Status
Full
Subject Term Reference
Architectural Design
Late Start
No
Catalog Number
101
Day or Night Section
Day
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Architectural Design - AAD
Crytime Formatted
9:30 a.m.–12:20 p.m. • F • Applied Technology Center • 08/30/24–12/13/24
Department Phone
856-5300
Notes (For Filter)
Lab Fee: $20. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes
Class Subject Abbr
AAD
Class Materials
No Cost

Independent Study

Course ID
105741
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Spring 2024
Notes
Lab Fee: $100. Enrollment in this class requires instructor consent. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Section
7003
Minimum Units (Decimal)
1.00
Maximum Units (Decimal)
1.00
Description

This course is designed for the student who has a particular interest in welding and wants to concentrate in that area. This is a contractual course.

Class Type
Independent Study
Status
Open
Subject Term Reference
Welding
Late Start
No
Catalog Number
225
Day or Night Section
Day
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Welding - WELD
Crytime Formatted
Applied Technology Center • 01/22/24–05/11/24
Department Phone
856-5300
Notes (For Filter)
Lab Fee: $100. Enrollment in this class requires instructor consent. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Class Subject Abbr
WELD

Independent Study

Course ID
105741
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Spring 2024
Notes
Lab Fee: $100. Enrollment in this class requires instructor consent. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Section
7002
Minimum Units (Decimal)
6.00
Maximum Units (Decimal)
6.00
Description

This course is designed for the student who has a particular interest in welding and wants to concentrate in that area. This is a contractual course.

Class Type
Independent Study
Status
Full
Subject Term Reference
Welding
Late Start
No
Catalog Number
225
Day or Night Section
Day
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Welding - WELD
Crytime Formatted
Applied Technology Center • 01/22/24–05/11/24
Department Phone
856-5300
Notes (For Filter)
Lab Fee: $100. Enrollment in this class requires instructor consent. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Class Subject Abbr
WELD

Electrical/Electronic Circuits

Course ID
134345
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Spring 2024
Notes
In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Section
5002
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

This course will cover basic principles of AC/DC electrical circuits. Topics will include foundational mathematical calculations, use of diagnostic equipment to perform troubleshooting, and introductory electrical circuit diagrams. This course satisfies 15 embedded hours toward specified programs and certificates for AAS Math/Quantitative Reasoning General Education requirements.

Class Type
In-Person Class
Status
Open
Subject Term Reference
Electrical and Mechanical Technology
Late Start
No
Catalog Number
110
Day or Night Section
Night
Is Late Start
Late Start Only
Session
Late Start Only
Class Subject Reference
Electrical and Mechanical Technology - ELM
Crytime Formatted
6:00–9:15 p.m. • M T • Applied Technology Center • 03/25/24–05/07/24
Department Phone
856-5300
Notes (For Filter)
In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Class Subject Abbr
ELM

Design and Manufacturing Process II

Course ID
135207
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Winter 2023-2024
Notes
Online Course Fee: $15. Lab Fee: $50. This course is hybrid with online materials and in-person lab meetings as scheduled with the instructor. Please contact the instructor Ean McNeill (emcneill@tmcc.edu) for more information.
Section
6001
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

The course will provide students with a thorough understanding of manufacturing processes and design. Topics covered include; equipment design, automation/control, quality, product design for manufacture-ability, industrial management, and systems design and operation.

Class Type
Hybrid
Status
Open
Subject Term Reference
Manufact. and Prod. Tech
Late Start
No
Catalog Number
343
Day or Night Section
Day
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Manufact. and Prod. Tech - MPT
Crytime Formatted
Applied Technology Center • 12/26/23–01/18/24
WebCollege • 12/26/23–01/18/24
Department Phone
856-5300
Notes (For Filter)
Online Course Fee: $15. Lab Fee: $50. This course is hybrid with online materials and in-person lab meetings as scheduled with the instructor. Please contact the instructor Ean McNeill (emcneill@tmcc.edu) for more information.
Prerequisites (For Filter)
Prerequisite: Admissions to the Bachelor of Applied Science, Cyber-Physical Manufacturing program.
Class Subject Abbr
MPT

Industry 4.0 / Cyber Physical Manufacturing

Course ID
135210
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Winter 2023-2024
Notes
Online Course Fee: $15. Lab Fee: $50. This course is hybrid with online materials and in-person lab meetings as scheduled with the instructor. Please contact the instructor Ean McNeill (emcneill@tmcc.edu) for more information.
Section
6001
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

This course provides a comprehensive and in-depth introduction to fourth industrial revolution (Industry 4.0) technologies and applications. The challenges and benefits attributed to the fourth industrial revolution; the effects on organizations; and future of the manufacturing workforce be will covered.

Class Type
Hybrid
Status
Open
Subject Term Reference
Manufact. and Prod. Tech
Late Start
No
Catalog Number
312
Day or Night Section
Day
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Manufact. and Prod. Tech - MPT
Crytime Formatted
Applied Technology Center • 12/26/23–01/18/24
WebCollege • 12/26/23–01/18/24
Department Phone
856-5300
Notes (For Filter)
Online Course Fee: $15. Lab Fee: $50. This course is hybrid with online materials and in-person lab meetings as scheduled with the instructor. Please contact the instructor Ean McNeill (emcneill@tmcc.edu) for more information.
Prerequisites (For Filter)
Prerequisite: Admissions to the Bachelor of Applied Science, Cyber-Physical Manufacturing program.
Class Subject Abbr
MPT

Welding Certification Preparation

Course ID
105751
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Summer 2024
Section
5201
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

This course is a contractual course designed for the advanced student who is pursuing AWS (American Welding Society), ASME (American Society of Mechanical Engineers), or API (American Petroleum Institute) certification(s). This course is also beneficial to the student requiring additional hands-on practice in order to better their individual skill in a selected process or processes. Instruction will be given on an individual basis.

Class Type
In-Person Class
Status
Full
Subject Term Reference
Welding
Late Start
No
Catalog Number
250
Day or Night Section
Night
Is Late Start
Normal Start
Session
Session 1
Class Subject Reference
Welding - WELD
Crytime Formatted
5:00–9:00 p.m. • T W TH • Applied Technology Center • 05/28/24–06/27/24
Department Phone
856-5300
Prerequisites (For Filter)
Prerequisite: WELD 241 or instructor approval.
Class Subject Abbr
WELD

Introduction to Programming for Mechatronics

Course ID
136180
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Spring 2024
Notes
In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Section
2002
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

This course will introduce students to the necessary skills to program mechatronic production equipment. This course satisfies 20 embedded hours toward specified programs and certificates for AAS Science General Education requirements.

Class Type
In-Person Class
Status
Full
Subject Term Reference
Manufact. and Prod. Tech
Late Start
No
Catalog Number
102
Day or Night Section
Day
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Manufact. and Prod. Tech - MPT
Crytime Formatted
4:30–7:30 p.m. • TH • Applied Technology Center • 01/25/24–05/09/24
Department Phone
856-5300
Notes (For Filter)
In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Class Subject Abbr
MPT
Subscribe to Applied Technology Center