Fall 2023

Internal TMCC Term ID
2238
Display On Software Page
Off
Display in Homepage Academics Section
Off

Fluid Power (Pneumatics, Electro-pneumatics)

Course ID
133925
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Fall 2023
Notes
Lab Fee: $50. This class is scheduled to meet face-to-face. Please check Canvas for Lab days and times. Students must complete all coursework by 12/9/2023. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Section
9601
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

This course is an introduction to fluid power systems involving pneumatics, hydraulics, and electrical control. This course satisfies 5 embedded hours toward specified programs and certificates for AAS Human Relations, 5 embedded hours toward specified programs and certificates for AAS Math, and 5 embedded hours toward specified programs and certificates for AAS Science General Education requirements

Class Type
In-Person Class
Status
Open
Subject Term Reference
Mechanical Technology
Late Start
No
Catalog Number
108
Day or Night Section
Day
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Mechanical Technology - MT
Crytime Formatted
Applied Technology Center • 08/21/23–12/09/23
Department Phone
856-5300
Notes (For Filter)
Lab Fee: $50. This class is scheduled to meet face-to-face. Please check Canvas for Lab days and times. Students must complete all coursework by 12/9/2023. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Prerequisites (For Filter)
ELM 110 or instructor approval.
Class Subject Abbr
MT

Fluid Power (Pneumatics, Electro-pneumatics)

Course ID
133925
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Fall 2023
Notes
Lab Fee: $50. This class is scheduled to meet face-to-face. Open Entry/Closed Exit lab. Please see Canvas for days and times. Students must complete all coursework by 12/9/2023. Students enrolling in DYN open-entry classes have 24 hours after the time of enrollment to drop the class for a 100% refund. Last date to enroll in a DYN open-entry class for Fall 2023 term is 11/11/2023. After 11/11/2023 no enrollment is allowed and classes cannot be dropped. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Section
8001
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

This course is an introduction to fluid power systems involving pneumatics, hydraulics, and electrical control. This course satisfies 5 embedded hours toward specified programs and certificates for AAS Human Relations, 5 embedded hours toward specified programs and certificates for AAS Math, and 5 embedded hours toward specified programs and certificates for AAS Science General Education requirements

Class Type
In-Person Class
Status
Open
Subject Term Reference
Mechanical Technology
Late Start
No
Catalog Number
108
Day or Night Section
Day
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Mechanical Technology - MT
Crytime Formatted
Applied Technology Center • 08/21/23–12/09/23
Department Phone
856-5300
Notes (For Filter)
Lab Fee: $50. This class is scheduled to meet face-to-face. Open Entry/Closed Exit lab. Please see Canvas for days and times. Students must complete all coursework by 12/9/2023. Students enrolling in DYN open-entry classes have 24 hours after the time of enrollment to drop the class for a 100% refund. Last date to enroll in a DYN open-entry class for Fall 2023 term is 11/11/2023. After 11/11/2023 no enrollment is allowed and classes cannot be dropped. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Prerequisites (For Filter)
ELM 110 or instructor approval.
Class Subject Abbr
MT

Quality Control

Course ID
104007
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Fall 2023
Notes
Lab Fee: $50. This class is scheduled to meet face-to-face. Please check Canvas for Lab days and times. Students must complete all coursework by 12/9/2023. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Section
9601
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

This course introduces students to the fundamental principles and practices of industrial quality control. Total Quality Management (TQM), LEAN Manufacturing, Acceptance Sampling Systems, and Continual Improvement are discussed in depth. This course satisfies 24 hours of instruction toward completing the embedded human relations curriculum requirements and also satisfies 15 hours of instruction toward completing the embedded math curriculum requirements, in accordance with Embedded Curriculum Guidelines Option A.

Class Type
In-Person Class
Status
Open
Subject Term Reference
Manufact. and Prod. Tech
Late Start
No
Catalog Number
140
Day or Night Section
Day
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Manufact. and Prod. Tech - MPT
Crytime Formatted
Applied Technology Center • 08/21/23–12/09/23
Department Phone
856-5300
Notes (For Filter)
Lab Fee: $50. This class is scheduled to meet face-to-face. Please check Canvas for Lab days and times. Students must complete all coursework by 12/9/2023. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Class Subject Abbr
MPT

Quality Control

Course ID
104007
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Fall 2023
Notes
Lab Fee: $50.This class is scheduled to meet face-to-face. Open Entry/Closed Exit lab. Please see Canvas for days and times. Students must complete all coursework by 12/9/2023. Students enrolling in DYN open-entry classes have 24 hours after the time of enrollment to drop the class for a 100% refund. Last date to enroll in a DYN open-entry class for Fall 2023 term is 11/11/2023. After 11/11/2023 no enrollment is allowed and classes cannot be dropped. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Section
8001
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

This course introduces students to the fundamental principles and practices of industrial quality control. Total Quality Management (TQM), LEAN Manufacturing, Acceptance Sampling Systems, and Continual Improvement are discussed in depth. This course satisfies 24 hours of instruction toward completing the embedded human relations curriculum requirements and also satisfies 15 hours of instruction toward completing the embedded math curriculum requirements, in accordance with Embedded Curriculum Guidelines Option A.

Class Type
In-Person Class
Status
Open
Subject Term Reference
Manufact. and Prod. Tech
Late Start
No
Catalog Number
140
Day or Night Section
Day
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Manufact. and Prod. Tech - MPT
Crytime Formatted
Applied Technology Center • 08/21/23–12/09/23
Department Phone
856-5300
Notes (For Filter)
Lab Fee: $50.This class is scheduled to meet face-to-face. Open Entry/Closed Exit lab. Please see Canvas for days and times. Students must complete all coursework by 12/9/2023. Students enrolling in DYN open-entry classes have 24 hours after the time of enrollment to drop the class for a 100% refund. Last date to enroll in a DYN open-entry class for Fall 2023 term is 11/11/2023. After 11/11/2023 no enrollment is allowed and classes cannot be dropped. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Class Subject Abbr
MPT

Material Handling

Course ID
133863
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Fall 2023
Notes
Lab Fee: $50. This class is scheduled to meet face-to-face. Please check Canvas for Lab days and times. Students must complete all coursework by 12/9/2023. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Section
9601
Minimum Units (Decimal)
2.00
Maximum Units (Decimal)
2.00
Description

This course will cover various forms of material handling including powered and non-powered equipment. This course will teach to standards set by the Occupational Safety and Health Administration. This course satisfies 5 embedded hours toward specified programs and certificates for AAS Human Relations General Education requirements.

Class Type
In-Person Class
Status
Open
Subject Term Reference
Manufact. and Prod. Tech
Late Start
No
Catalog Number
135
Day or Night Section
Day
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Manufact. and Prod. Tech - MPT
Crytime Formatted
Applied Technology Center • 08/21/23–12/09/23
Department Phone
856-5300
Notes (For Filter)
Lab Fee: $50. This class is scheduled to meet face-to-face. Please check Canvas for Lab days and times. Students must complete all coursework by 12/9/2023. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Class Subject Abbr
MPT

Material Handling

Course ID
133863
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Fall 2023
Notes
Lab Fee: $50.This class is scheduled to meet face-to-face. Open Entry/Closed Exit lab. Please see Canvas for days and times. Students must complete all coursework by 12/9/2023. Students enrolling in DYN open-entry classes have 24 hours after the time of enrollment to drop the class for a 100% refund. Last date to enroll in a DYN open-entry class for Fall 2023 term is 11/11/2023. After 11/11/2023 no enrollment is allowed and classes cannot be dropped. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Section
8001
Minimum Units (Decimal)
2.00
Maximum Units (Decimal)
2.00
Description

This course will cover various forms of material handling including powered and non-powered equipment. This course will teach to standards set by the Occupational Safety and Health Administration. This course satisfies 5 embedded hours toward specified programs and certificates for AAS Human Relations General Education requirements.

Class Type
In-Person Class
Status
Open
Subject Term Reference
Manufact. and Prod. Tech
Late Start
No
Catalog Number
135
Day or Night Section
Day
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Manufact. and Prod. Tech - MPT
Crytime Formatted
Applied Technology Center • 08/21/23–12/09/23
Department Phone
856-5300
Notes (For Filter)
Lab Fee: $50.This class is scheduled to meet face-to-face. Open Entry/Closed Exit lab. Please see Canvas for days and times. Students must complete all coursework by 12/9/2023. Students enrolling in DYN open-entry classes have 24 hours after the time of enrollment to drop the class for a 100% refund. Last date to enroll in a DYN open-entry class for Fall 2023 term is 11/11/2023. After 11/11/2023 no enrollment is allowed and classes cannot be dropped. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Class Subject Abbr
MPT

Automated Production Concepts III

Course ID
104005
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Fall 2023
Notes
Online Course Fee: $15. This is a hybrid section: part in-person and part web-based. Students must attend the in-person meetings and sign into the web-based portion on the first day of class, 8/21/2023 or risk being dropped for non-attendance. In-person class meetings will be scheduled based on students' availability.
Section
1501
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

This course will serve as an introductory-intermediate course that focuses on how to operate various equipment germane to industry 4.0. Topics will include Manufacturing Execution Systems (MES), Human Machine Interfaces (HMI), data security, and 3D modeling. This course satisfies 5 embedded hours toward specified programs and certificates for AAS Human Relations as well as 5 embedded hours toward specified programs and certificates for AAS Science General Education requirements.

Class Type
Hybrid
Status
Open
Subject Term Reference
Manufact. and Prod. Tech
Late Start
No
Catalog Number
130
Day or Night Section
Day
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Manufact. and Prod. Tech - MPT
Crytime Formatted
Applied Technology Center • 08/21/23–12/09/23
WebCollege • 08/21/23–12/09/23
Department Phone
856-5300
Notes (For Filter)
Online Course Fee: $15. This is a hybrid section: part in-person and part web-based. Students must attend the in-person meetings and sign into the web-based portion on the first day of class, 8/21/2023 or risk being dropped for non-attendance. In-person class meetings will be scheduled based on students' availability.
Class Subject Abbr
MPT

Automated Production Concepts II

Course ID
104003
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Fall 2023
Notes
Lab Fee: $50. This class is scheduled to meet face-to-face. Please check Canvas for hours. Students must complete all coursework by 12/9/2023. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Section
9601
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

This course will focus on multiple components of Industry 4.0 at an introductory-intermediate level. Topics will include smart sensors and their relation to industry 4.0. This course satisfies 5 embedded hours toward specified programs and certificates for AAS Human Relations as well as 5 embedded hours toward specified programs and certificates for AAS Science General Education requirements.

Class Type
In-Person Class
Status
Open
Subject Term Reference
Manufact. and Prod. Tech
Late Start
No
Catalog Number
120
Day or Night Section
Day
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Manufact. and Prod. Tech - MPT
Crytime Formatted
Applied Technology Center • 08/21/23–12/09/23
Department Phone
856-5300
Notes (For Filter)
Lab Fee: $50. This class is scheduled to meet face-to-face. Please check Canvas for hours. Students must complete all coursework by 12/9/2023. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Class Subject Abbr
MPT

Automated Production Concepts II

Course ID
104003
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Fall 2023
Notes
Lab Fee: $50.This class is scheduled to meet face-to-face. Open Entry/Closed Exit lab. Please see Canvas for days and times. Students must complete all coursework by 12/9/2023. Students enrolling in DYN open-entry classes have 24 hours after the time of enrollment to drop the class for a 100% refund. Last date to enroll in a DYN open-entry class for Fall 2023 term is 11/11/2023. After 11/11/2023 no enrollment is allowed and classes cannot be dropped. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Section
8001
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

This course will focus on multiple components of Industry 4.0 at an introductory-intermediate level. Topics will include smart sensors and their relation to industry 4.0. This course satisfies 5 embedded hours toward specified programs and certificates for AAS Human Relations as well as 5 embedded hours toward specified programs and certificates for AAS Science General Education requirements.

Class Type
In-Person Class
Status
Open
Subject Term Reference
Manufact. and Prod. Tech
Late Start
No
Catalog Number
120
Day or Night Section
Day
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Manufact. and Prod. Tech - MPT
Crytime Formatted
Applied Technology Center • 08/21/23–12/09/23
Department Phone
856-5300
Notes (For Filter)
Lab Fee: $50.This class is scheduled to meet face-to-face. Open Entry/Closed Exit lab. Please see Canvas for days and times. Students must complete all coursework by 12/9/2023. Students enrolling in DYN open-entry classes have 24 hours after the time of enrollment to drop the class for a 100% refund. Last date to enroll in a DYN open-entry class for Fall 2023 term is 11/11/2023. After 11/11/2023 no enrollment is allowed and classes cannot be dropped. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Class Subject Abbr
MPT

Automated Production Concepts I

Course ID
104001
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Fall 2023
Notes
Lab Fee: $50. Lab hours TBD, please check Canvas closer 8/21/2023. Students must complete all coursework by 12/9/2023. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Section
9601
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

This course is an introduction to the concept of industry 4.0: the fourth iteration of industrial revolution. This course satisfies 10 embedded hours toward specified programs and certificates for AAS Human Relations General Education requirements.

Class Type
In-Person Class
Status
Open
Subject Term Reference
Manufact. and Prod. Tech
Late Start
No
Catalog Number
110
Day or Night Section
Day
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Manufact. and Prod. Tech - MPT
Crytime Formatted
Applied Technology Center • 08/21/23–12/09/23
Department Phone
856-5300
Notes (For Filter)
Lab Fee: $50. Lab hours TBD, please check Canvas closer 8/21/2023. Students must complete all coursework by 12/9/2023. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Class Subject Abbr
MPT
Subscribe to Fall 2023