Mechanical Technology

Abbreviation
MT

Fluid Power (Pneumatics, Electro-pneumatics)

Course ID
133925
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Fall 2024
Notes
Lab Fee: $50. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Section
8401
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

This course is an introduction to fluid power systems involving pneumatics, hydraulics, and electrical control. This course satisfies 5 embedded hours toward specified programs and certificates for AAS Human Relations, 5 embedded hours toward specified programs and certificates for AAS Math, and 5 embedded hours toward specified programs and certificates for AAS Science General Education requirements

Class Type
In-Person Class
Status
Open
Subject Term Reference
Mechanical Technology
Late Start
No
Catalog Number
108
Day or Night Section
Day
Is Late Start
Late Start Only
Session
Normal
Class Subject Reference
Mechanical Technology - MT
Crytime Formatted
1:00–5:30 p.m. • M W • Applied Technology Center • 09/30/24–10/30/24
Department Phone
856-5300
Notes (For Filter)
Lab Fee: $50. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Prerequisites (For Filter)
Pre or Co-requisite: ELM 110 or instructor approval.
Class Subject Abbr
MT

Fluid Power (Pneumatics, Electro-pneumatics)

Course ID
133925
Topic ID
0
Course Location
Other
Academic Term
Spring 2024
Notes
Lab Fee: $50. This is for a specific industry only. For further information, please contact Pat Jarvis (pjarvis@tmcc.edu). In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Section
8402
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

This course is an introduction to fluid power systems involving pneumatics, hydraulics, and electrical control. This course satisfies 5 embedded hours toward specified programs and certificates for AAS Human Relations, 5 embedded hours toward specified programs and certificates for AAS Math, and 5 embedded hours toward specified programs and certificates for AAS Science General Education requirements

Class Type
In-Person Class
Status
Open
Subject Term Reference
Mechanical Technology
Late Start
No
Catalog Number
108
Day or Night Section
Day
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Mechanical Technology - MT
Crytime Formatted
8:00 a.m.–4:30 p.m. • M T W TH F • Other Location • 01/08/24–01/12/24
Department Phone
856-5300
Notes (For Filter)
Lab Fee: $50. This is for a specific industry only. For further information, please contact Pat Jarvis (pjarvis@tmcc.edu). In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Prerequisites (For Filter)
ELM 110 or instructor approval.
Class Subject Abbr
MT

Fluid Power (Pneumatics, Electro-pneumatics)

Course ID
133925
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Fall 2023
Notes
Lab Fee: $50. This class is scheduled to meet face-to-face. Please check Canvas for Lab days and times. Students must complete all coursework by 12/9/2023. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Section
9601
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

This course is an introduction to fluid power systems involving pneumatics, hydraulics, and electrical control. This course satisfies 5 embedded hours toward specified programs and certificates for AAS Human Relations, 5 embedded hours toward specified programs and certificates for AAS Math, and 5 embedded hours toward specified programs and certificates for AAS Science General Education requirements

Class Type
In-Person Class
Status
Open
Subject Term Reference
Mechanical Technology
Late Start
No
Catalog Number
108
Day or Night Section
Day
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Mechanical Technology - MT
Crytime Formatted
Applied Technology Center • 08/21/23–12/09/23
Department Phone
856-5300
Notes (For Filter)
Lab Fee: $50. This class is scheduled to meet face-to-face. Please check Canvas for Lab days and times. Students must complete all coursework by 12/9/2023. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Prerequisites (For Filter)
ELM 110 or instructor approval.
Class Subject Abbr
MT

Fluid Power (Pneumatics, Electro-pneumatics)

Course ID
133925
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Fall 2023
Notes
Lab Fee: $50. This class is scheduled to meet face-to-face. Open Entry/Closed Exit lab. Please see Canvas for days and times. Students must complete all coursework by 12/9/2023. Students enrolling in DYN open-entry classes have 24 hours after the time of enrollment to drop the class for a 100% refund. Last date to enroll in a DYN open-entry class for Fall 2023 term is 11/11/2023. After 11/11/2023 no enrollment is allowed and classes cannot be dropped. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Section
8001
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

This course is an introduction to fluid power systems involving pneumatics, hydraulics, and electrical control. This course satisfies 5 embedded hours toward specified programs and certificates for AAS Human Relations, 5 embedded hours toward specified programs and certificates for AAS Math, and 5 embedded hours toward specified programs and certificates for AAS Science General Education requirements

Class Type
In-Person Class
Status
Open
Subject Term Reference
Mechanical Technology
Late Start
No
Catalog Number
108
Day or Night Section
Day
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Mechanical Technology - MT
Crytime Formatted
Applied Technology Center • 08/21/23–12/09/23
Department Phone
856-5300
Notes (For Filter)
Lab Fee: $50. This class is scheduled to meet face-to-face. Open Entry/Closed Exit lab. Please see Canvas for days and times. Students must complete all coursework by 12/9/2023. Students enrolling in DYN open-entry classes have 24 hours after the time of enrollment to drop the class for a 100% refund. Last date to enroll in a DYN open-entry class for Fall 2023 term is 11/11/2023. After 11/11/2023 no enrollment is allowed and classes cannot be dropped. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Prerequisites (For Filter)
ELM 110 or instructor approval.
Class Subject Abbr
MT
Subscribe to Mechanical Technology