Machine Tool Technology - MTT

Machine Shop II

Course ID
104099
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Fall 2023
Notes
Lab Fee $50. This class is scheduled to meet face-to-face. Open Entry/Closed Exit lab Mon-Thu from 4-9 p.m. Students enrolling in DYN open-entry classes have 24 hours after the time of enrollment to drop the class for a 100% refund. Students must enroll by 10/2/2023 and complete all work by 12/9/2023. Meets at EDSN 164. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes
Section
8001
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

This course is a continuation of MTT 105 and teaches students to prepare single point external and internal unified screw threads, generate angles with the compound rest within one degree, ream holes concentric within .001 inches, determine cutting speeds, and perform facing, grooving, part-off, and tuning operations.

Class Type
In-Person Class
Status
Open
Subject Term Reference
Machine Tool Technology
Late Start
No
Catalog Number
110
Day or Night Section
Day
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Machine Tool Technology - MTT
Crytime Formatted
Applied Technology Center • 08/21/23–12/09/23
Department Phone
856-5300
Notes (For Filter)
Lab Fee $50. This class is scheduled to meet face-to-face. Open Entry/Closed Exit lab Mon-Thu from 4-9 p.m. Students enrolling in DYN open-entry classes have 24 hours after the time of enrollment to drop the class for a 100% refund. Students must enroll by 10/2/2023 and complete all work by 12/9/2023. Meets at EDSN 164. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes
Prerequisites (For Filter)
Prerequisite or Corequisite: MTT 105
Class Subject Abbr
MTT

Machine Shop I

Course ID
104095
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Fall 2023
Notes
Lab Fee $50. Lab is open from 4-9 p.m., Mon.-Thu. Lab meets in EDSN 164. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes
Section
9601
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

Introduces basic lathe applications which will consists of identifying lathe components and controls, understanding turning safety, calculating speeds and feeds, using various tools and tool holders, identifying basic tool geometry, and the use of common lathe tooling. Students will perform basic lathe operations, which will consist of facing, turning, and drilling. Students will be required to produce specified parts to a tolerance of +/- .004 in. and perform competencies set by manufacturing standards.

Class Type
In-Person Class
Status
Open
Subject Term Reference
Machine Tool Technology
Late Start
No
Catalog Number
105
Day or Night Section
Day
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Machine Tool Technology - MTT
Crytime Formatted
Applied Technology Center • 08/21/23–12/09/23
Department Phone
856-5300
Notes (For Filter)
Lab Fee $50. Lab is open from 4-9 p.m., Mon.-Thu. Lab meets in EDSN 164. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes
Prerequisites (For Filter)
Prerequisite or Corequisite: MTT 101
Class Subject Abbr
MTT

Machine Shop I

Course ID
104095
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Fall 2023
Notes
Lab Fee $50. This class is scheduled to meet face-to-face. Open Entry/Closed Exit lab Mon.-Thu. from 4-9 p.m. Students enrolling in DYN open-entry classes have 24 hours after the time of enrollment to drop the class for a 100% refund. Students must enroll by 10/2/2023 and complete all work by 12/9/2023. Meets at EDSN 164. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes
Section
8001
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

Introduces basic lathe applications which will consists of identifying lathe components and controls, understanding turning safety, calculating speeds and feeds, using various tools and tool holders, identifying basic tool geometry, and the use of common lathe tooling. Students will perform basic lathe operations, which will consist of facing, turning, and drilling. Students will be required to produce specified parts to a tolerance of +/- .004 in. and perform competencies set by manufacturing standards.

Class Type
In-Person Class
Status
Open
Subject Term Reference
Machine Tool Technology
Late Start
No
Catalog Number
105
Day or Night Section
Day
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Machine Tool Technology - MTT
Crytime Formatted
Applied Technology Center • 08/21/23–12/09/23
Department Phone
856-5300
Notes (For Filter)
Lab Fee $50. This class is scheduled to meet face-to-face. Open Entry/Closed Exit lab Mon.-Thu. from 4-9 p.m. Students enrolling in DYN open-entry classes have 24 hours after the time of enrollment to drop the class for a 100% refund. Students must enroll by 10/2/2023 and complete all work by 12/9/2023. Meets at EDSN 164. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes
Prerequisites (For Filter)
Prerequisite or Corequisite: MTT 101
Class Subject Abbr
MTT

Introduction to Machine Shop

Course ID
104091
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Fall 2023
Notes
Lab Fee: $25. Lab is open from 4-9 p.m., Mon.-Thu. Lab meets in EDSN 164. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes
Section
9601
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

Introduces safety procedures, use of bench tools, layout tools, power saws, drill presses, precision measurement tools, rotary tables and indexing devices, lathe and mill cutting tools and tool holding, work holding and machining applications as well as the various hand tools related to the machine shop.

Class Type
In-Person Class
Status
Open
Subject Term Reference
Machine Tool Technology
Late Start
No
Catalog Number
101
Day or Night Section
Day
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Machine Tool Technology - MTT
Crytime Formatted
Applied Technology Center • 08/21/23–12/09/23
Department Phone
856-5300
Notes (For Filter)
Lab Fee: $25. Lab is open from 4-9 p.m., Mon.-Thu. Lab meets in EDSN 164. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes
Class Subject Abbr
MTT

Introduction to Machine Shop

Course ID
104091
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Fall 2023
Notes
Lab Fee: $25. This class is scheduled to meet face-to-face. Open Entry/Closed Exit lab Mon.-Thu. from 4-9 p.m. Students enrolling in DYN open-entry classes have 24 hours after the time of enrollment to drop the class for a 100% refund. Students must enroll by 10/7/2023 and complete all work by 12/9/2023. Meets at EDSN 164. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes
Section
8001
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

Introduces safety procedures, use of bench tools, layout tools, power saws, drill presses, precision measurement tools, rotary tables and indexing devices, lathe and mill cutting tools and tool holding, work holding and machining applications as well as the various hand tools related to the machine shop.

Class Type
In-Person Class
Status
Full
Subject Term Reference
Machine Tool Technology
Late Start
No
Catalog Number
101
Day or Night Section
Day
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Machine Tool Technology - MTT
Crytime Formatted
Applied Technology Center • 08/21/23–12/09/23
Department Phone
856-5300
Notes (For Filter)
Lab Fee: $25. This class is scheduled to meet face-to-face. Open Entry/Closed Exit lab Mon.-Thu. from 4-9 p.m. Students enrolling in DYN open-entry classes have 24 hours after the time of enrollment to drop the class for a 100% refund. Students must enroll by 10/7/2023 and complete all work by 12/9/2023. Meets at EDSN 164. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes
Class Subject Abbr
MTT
Subscribe to Machine Tool Technology - MTT