Spring 2024

Internal TMCC Term ID
2242
Display On Software Page
Off
Display in Homepage Academics Section
Off

Vocal Techniques

Course ID
104157
Topic ID
0
Course Location
Dandini Campus
Academic Term
Spring 2024
Notes
Lab Fee: $25. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Section
2001
Minimum Units (Decimal)
2.00
Maximum Units (Decimal)
2.00
Description

Fundamentals of tone production, breath control, and practical techniques involved in reading and interpreting songs. May be repeated for a maximum of 4 credits.

Class Type
In-Person Class
Status
Open
Subject Term Reference
Music
Late Start
No
Catalog Number
105
Day or Night Section
Night
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Music - MUS
Crytime Formatted
5:30–7:10 p.m. • M • Dandini Campus • 01/22/24–05/06/24
Department Phone
674-7610
Notes (For Filter)
Lab Fee: $25. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Class Subject Abbr
MUS
Class Materials
No Cost

Machine Shop IV

Course ID
104118
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Spring 2024
Notes
Lab Fee: $50. Lab is open from 4-9 p.m., Mon.-Thu. Lab meets in EDSN 164. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Section
9601
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

This is a continuation of MTT 250 and prepares students to determine hole locations by coordinates and degrees, use a rotary table, boring head, form tools, angle work, and work within +/- .001 inch tolerance.

Class Type
In-Person Class
Status
Open
Subject Term Reference
Machine Tool Technology
Late Start
No
Catalog Number
260
Day or Night Section
Day
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Machine Tool Technology - MTT
Crytime Formatted
Applied Technology Center • 01/22/24–05/09/24
Department Phone
856-5300
Notes (For Filter)
Lab Fee: $50. Lab is open from 4-9 p.m., Mon.-Thu. Lab meets in EDSN 164. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Prerequisites (For Filter)
Prerequisite: MTT 250. Course may be taken concurrently with MTT 250.
Class Subject Abbr
MTT

Machine Shop IV

Course ID
104118
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Spring 2024
Notes
Lab Fee: $50. Open Entry/Closed Exit Lab from 4-9 p.m., Mon.-Thu. Labs meet in EDSN 164. Students enrolling in DYN open-entry classes have 24 hours after the time of enrollment to drop the class for a 100% refund. Last date to enroll in a DYN open-entry class for Spring 2024 term is 3/08/2024. After 3/08/2024 no enrollment is allowed and classes cannot be dropped. Students must complete all work by 5/9/2024. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Section
8001
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

This is a continuation of MTT 250 and prepares students to determine hole locations by coordinates and degrees, use a rotary table, boring head, form tools, angle work, and work within +/- .001 inch tolerance.

Class Type
In-Person Class
Status
Open
Subject Term Reference
Machine Tool Technology
Late Start
No
Catalog Number
260
Day or Night Section
Day
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Machine Tool Technology - MTT
Crytime Formatted
Applied Technology Center • 01/22/24–05/09/24
Department Phone
856-5300
Notes (For Filter)
Lab Fee: $50. Open Entry/Closed Exit Lab from 4-9 p.m., Mon.-Thu. Labs meet in EDSN 164. Students enrolling in DYN open-entry classes have 24 hours after the time of enrollment to drop the class for a 100% refund. Last date to enroll in a DYN open-entry class for Spring 2024 term is 3/08/2024. After 3/08/2024 no enrollment is allowed and classes cannot be dropped. Students must complete all work by 5/9/2024. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Prerequisites (For Filter)
Prerequisite: MTT 250. Course may be taken concurrently with MTT 250.
Class Subject Abbr
MTT

Machine Shop III

Course ID
104114
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Spring 2024
Notes
Lab Fee: $50. Lab is open from 4-9 p.m., Mon.-Thu. Lab meets in EDSN 164. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Section
9601
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

Introduces basic milling machine applications which will consist of identifying mill components and controls, understanding milling safety, calculating speeds and feeds, using various tools and tool holders, identifying basic tool geometry, and the use of common milling machine tooling. Students will perform basic milling operations consisting of facing, squaring, slotting, and drilling. Students will be required to produce specified parts to a tolerance of +/- .004 in. and perform competencies set by manufacturing standards.

Class Type
In-Person Class
Status
Open
Subject Term Reference
Machine Tool Technology
Late Start
No
Catalog Number
250
Day or Night Section
Day
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Machine Tool Technology - MTT
Crytime Formatted
Applied Technology Center • 01/22/24–05/09/24
Department Phone
856-5300
Notes (For Filter)
Lab Fee: $50. Lab is open from 4-9 p.m., Mon.-Thu. Lab meets in EDSN 164. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Class Subject Abbr
MTT

Machine Shop III

Course ID
104114
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Spring 2024
Notes
Lab Fee: $50. Open Entry/Closed Exit Lab from 4-9 p.m., Mon.-Thu. Lab meets in EDSN 164, Mon.-Thu. Students enrolling in DYN open-entry classes have 24 hours after the time of enrollment to drop the class for a 100% refund. Last date to enroll in a DYN open-entry class for Spring 2024 term is 3/08/2024. After 3/08/2024 no enrollment is allowed and classes cannot be dropped. Students must complete all work by 5/9/2024. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Section
8001
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

Introduces basic milling machine applications which will consist of identifying mill components and controls, understanding milling safety, calculating speeds and feeds, using various tools and tool holders, identifying basic tool geometry, and the use of common milling machine tooling. Students will perform basic milling operations consisting of facing, squaring, slotting, and drilling. Students will be required to produce specified parts to a tolerance of +/- .004 in. and perform competencies set by manufacturing standards.

Class Type
In-Person Class
Status
Open
Subject Term Reference
Machine Tool Technology
Late Start
No
Catalog Number
250
Day or Night Section
Day
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Machine Tool Technology - MTT
Crytime Formatted
Applied Technology Center • 01/22/24–05/09/24
Department Phone
856-5300
Notes (For Filter)
Lab Fee: $50. Open Entry/Closed Exit Lab from 4-9 p.m., Mon.-Thu. Lab meets in EDSN 164, Mon.-Thu. Students enrolling in DYN open-entry classes have 24 hours after the time of enrollment to drop the class for a 100% refund. Last date to enroll in a DYN open-entry class for Spring 2024 term is 3/08/2024. After 3/08/2024 no enrollment is allowed and classes cannot be dropped. Students must complete all work by 5/9/2024. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Class Subject Abbr
MTT

Special Topics in Manufacturing

Course ID
104108
Topic ID
3
Course Location
Applied Technology Center
Academic Term
Spring 2024
Notes
This is a CNC Swiss Lathe programming and operations class. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Section
2001
Minimum Units (Decimal)
4.00
Maximum Units (Decimal)
4.00
Description

This course introduces and discusses special topics related to Manufacturing Technology.

Class Type
In-Person Class
Status
Open
Subject Term Reference
Machine Tool Technology
Late Start
No
Catalog Number
198
Day or Night Section
Night
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Machine Tool Technology - MTT
Crytime Formatted
7:00–8:50 p.m. • T TH • Applied Technology Center • 01/23/24–05/09/24
Department Phone
856-5300
Notes (For Filter)
This is a CNC Swiss Lathe programming and operations class. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Class Subject Abbr
MTT

Metallurgy I

Course ID
104024
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Spring 2024
Notes
Lab Fee: $10. Lab is open from 4-9 p.m., Mon.-Thu. Labs meet in EDSN 164. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Section
9601
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

Offers a study of metallurgical properties in an effort to understand both the behavior of metals and their service to industry. Characteristics during heating, cooling, shaping, forming, and the stresses related to their mechanical properties are covered. The theory behind the alloys, heat treatment processes, and the impact they have on strength, toughness, hardness, elasticity, ductility, malleability, wear resistance and fatigue resistance is investigated. This course fulfills the natural sciences degree requirement for nontransferable AAS degrees only.

Class Type
In-Person Class
Status
Open
Subject Term Reference
Machine Tool Technology
Late Start
No
Catalog Number
150
Day or Night Section
Day
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Machine Tool Technology - MTT
Crytime Formatted
Applied Technology Center • 01/22/24–05/09/24
Department Phone
856-5300
Notes (For Filter)
Lab Fee: $10. Lab is open from 4-9 p.m., Mon.-Thu. Labs meet in EDSN 164. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Class Subject Abbr
MTT

Metallurgy I

Course ID
104024
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Spring 2024
Notes
Lab Fee: $10. Open Entry/Closed Exit Lab from 4-9 p.m., Mon.-Thu. Lab meets in EDSN 164. Students enrolling in DYN open-entry classes have 24 hours after the time of enrollment to drop the class for a 100% refund. Last date to enroll in a DYN open-entry class for Spring 2024 term is 3/08/2024. After 3/08/2024 no enrollment is allowed and classes cannot be dropped.Students must complete all work by 5/9/2024. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Section
8001
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

Offers a study of metallurgical properties in an effort to understand both the behavior of metals and their service to industry. Characteristics during heating, cooling, shaping, forming, and the stresses related to their mechanical properties are covered. The theory behind the alloys, heat treatment processes, and the impact they have on strength, toughness, hardness, elasticity, ductility, malleability, wear resistance and fatigue resistance is investigated. This course fulfills the natural sciences degree requirement for nontransferable AAS degrees only.

Class Type
In-Person Class
Status
Open
Subject Term Reference
Machine Tool Technology
Late Start
No
Catalog Number
150
Day or Night Section
Day
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Machine Tool Technology - MTT
Crytime Formatted
Applied Technology Center • 01/22/24–05/09/24
Department Phone
856-5300
Notes (For Filter)
Lab Fee: $10. Open Entry/Closed Exit Lab from 4-9 p.m., Mon.-Thu. Lab meets in EDSN 164. Students enrolling in DYN open-entry classes have 24 hours after the time of enrollment to drop the class for a 100% refund. Last date to enroll in a DYN open-entry class for Spring 2024 term is 3/08/2024. After 3/08/2024 no enrollment is allowed and classes cannot be dropped.Students must complete all work by 5/9/2024. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Class Subject Abbr
MTT

Inspection Techniques

Course ID
104103
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Spring 2024
Notes
Lab Fee: $25. Lab is open from 4-9 p.m., Mon.-Thu. Lab meets in EDSN 164. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Section
9601
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

Exposes the student to the principles of dimensional metrology and explores Geometric Dimensioning and Tolerancing (GD&T) concepts and applications. Students will learn how to use common measuring instruments relating to state-of-the-art manufacturing environments. Students will also learn the importance of Quality Control, TQM, and SPC processes as they relate to manufacturing environments.

Class Type
In-Person Class
Status
Open
Subject Term Reference
Machine Tool Technology
Late Start
No
Catalog Number
140
Day or Night Section
Day
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Machine Tool Technology - MTT
Crytime Formatted
Applied Technology Center • 01/22/24–05/09/24
Department Phone
856-5300
Notes (For Filter)
Lab Fee: $25. Lab is open from 4-9 p.m., Mon.-Thu. Lab meets in EDSN 164. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Class Subject Abbr
MTT

Inspection Techniques

Course ID
104103
Topic ID
0
Course Location
Applied Technology Center
Academic Term
Spring 2024
Notes
Lab Fee: $25. Open Entry/Closed Exit Lab from 4-9 p.m., Mon.-Thu. Lab meets in EDSN 164. Students enrolling in DYN open-entry classes have 24 hours after the time of enrollment to drop the class for a 100% refund. Last date to enroll in a DYN open-entry class for Spring 2024 term is 3/08/2024. After 3/08/2024 no enrollment is allowed and classes cannot be dropped. Students must complete all work by 5/9/2024. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Section
8001
Minimum Units (Decimal)
3.00
Maximum Units (Decimal)
3.00
Description

Exposes the student to the principles of dimensional metrology and explores Geometric Dimensioning and Tolerancing (GD&T) concepts and applications. Students will learn how to use common measuring instruments relating to state-of-the-art manufacturing environments. Students will also learn the importance of Quality Control, TQM, and SPC processes as they relate to manufacturing environments.

Class Type
In-Person Class
Status
Open
Subject Term Reference
Machine Tool Technology
Late Start
No
Catalog Number
140
Day or Night Section
Day
Is Late Start
Normal Start
Session
Normal
Class Subject Reference
Machine Tool Technology - MTT
Crytime Formatted
Applied Technology Center • 01/22/24–05/09/24
Department Phone
856-5300
Notes (For Filter)
Lab Fee: $25. Open Entry/Closed Exit Lab from 4-9 p.m., Mon.-Thu. Lab meets in EDSN 164. Students enrolling in DYN open-entry classes have 24 hours after the time of enrollment to drop the class for a 100% refund. Last date to enroll in a DYN open-entry class for Spring 2024 term is 3/08/2024. After 3/08/2024 no enrollment is allowed and classes cannot be dropped. Students must complete all work by 5/9/2024. In the event of public health restrictions or other emergencies, classes may need to be changed to Web-Live, Web, or Hybrid instruction modes. Students will be notified by instructors and/or academic departments of any required changes.
Class Subject Abbr
MTT
Subscribe to Spring 2024